Moog MF-104M Moogerfooger Analog Delay Pedal

January 13th 2018 -

Moog MF-104M Moogerfooger Analog Delay Pedal

Pre-Owned Gear & B-Stock. Moog MF-104M Moogerfooger Analog Delay Pedal. Originally designed by Bob Moog and released in 2000, the Classic MF-104 Analog Delay was manufactured as a limited edition release of 1000 units. A special “Bucket Brigade” delay chip was employed allowing the effect to remain completely analog. Since then there have been two reissues of the Classic MF-104, the MF-104Z and the MF-104SD. In that time, each has been added to a short list of the most sought after analog delays in history. The MF-104M recreates the sound and vibe of the Classic MF-104. It even uses the same vintage “Bucket Brigade” delay chips found in the original, which provide 800ms of the richest, creamiest, all analog delay on the planet. A new 6 Waveshape LFO significantly expands the sonic capabilities of this Classic Analog Delay. Use it to create expansive delays that transport you through time, beautifully modulate the delay trails, or create sounds and delays that are simply out of this world. Spillover Mode has been the most popular modification to the MF-104 and is now included in the MF-104M. Decide on the fly whether delay trails end or continue when you disengage the Delay. A dedicated Tap Tempo switch lets you quickly tap in your Delay Time or LFO Rate, and the addition of MIDI brings a new world of control and function to the MF-104M. Use it to control and manipulate every function on and under the hood. It’s also a great way to incorporate an analog delay into your studio productions. Rear panel features include CV/Expression Pedal inputs which provide hands free control and manipulation of Time, Rate, Feedback, Amount, and Mix. Like all Moogerfoogers, you can connect Moog EP2 expression pedals to any of these CV/Expression inputs to control functions, or connect other Moogerfoogers and create new effects. Additionally, the Feedback Insert allows you to patch in other stomp box or outboard effects onto the delay line for even more creative flexibility. The MF-104M will be available for a limited time, so grab this piece of Analog history before it’s gone forever-forever-forever-forever! DRIVE: From -7dB to +28dB of input signal gain or attenuation. OUTPUT LEVEL: Use to optimize overall Output volume. MIX: Cross fader control to set the ratio of wet to dry signal. TIME: Control range of 40ms – 800ms of analog delay time. SHORT/LONG RANGE: Select between a short, bright delay 40ms to 400ms and a long, dark delay 80ms to 800ms. FEEDBACK: Continuous control of Delay line output fed back to Delay input from no Feedback to infinite. WAVESHAPE: Selectable 6 Waveshape LFO for modulating the Delay Time. RATE: Controls the LFO Rate from 0.05 Hz to 50 Hz (Wider range available via CV and MIDI). AMOUNT: Controls the overall Amount of LFO modulation of the Delay Time. TIME LED: The LED is Red when controlled by the Time knob, and Green when controlled by Tap Tempo. LEVEL LED: Bi-Color LED displays input signal for optimum processing level. BYPASS LED: When the effect is on the Bypass LED is green. When in Spillover mode the Bypass LED is orange. When the effect is off the Bypass LED is red. RATE LED: Indicates both the Rate and Waveform LFO settings. The LED is Red when the Rate is set from the front panel, Green when set by Tap Tempo, and Orange when the LFO is synced to MIDI clock. When synced to MIDI clock, the Rate control is quantized to select only rhythmic subdivisions of the MIDI clock tempo. TAP TEMPO: Tap Tempo control assignable to Delay Time or LFO Rate by holding down the switch. Time LED or Rate LED will flash Green to indicate Tap Tempo assignment. SPILLOVER MODE: Press and hold Bypass to engage/disengage Spillover Mode. AUDIO IN: 1/4 TS jack that accepts any instrument level to line level audio signal. MIX OUT: 1/4 TS jack with adjustable output level for instrument or line level output. DELAY OUT: 1/4 TS jack that supplies wet-only output. FEEDBACK, TIME, LFO RATE, MIX, LFO AMOUNT: All are 1/4″ TRS jacks that accept Moog EP-2 (or equivalent) expression pedals, or 0-5VDC control voltages from either two-circuit (TS) or three-circuit (TRS) 1/4″ jacks. FEEDBACK INSERT: 1/4 TRS jack for inserting effects on the feedback loop of the Delay Line. MIDI IN: 5 Pin DIN input for controlling the MF-104M via MIDI. +9VDC POWER JACK: Accepts standard 9 volt center positive barrel power adaptor (power adaptor included). Merchandise and packaging MUST be in the same condition as when received. Alto Music reserves the right to refuse any return if it appears the item has been used. Software (if unsealed or registered). Harmonicas, Mouthpieces, Earbuds/Earphones/Headphones(if unsealed), or any item that may come in contact with the mouth, ears or nose. There are no warranties for the following items. BEST OFFERS – Please submit offers directly using the “make an offer” button. We will consider your offer as soon as it is received. We will then either accept, decline, or counter accordingly. Please do not send a message or call Alto Music in regards to best offers. If a specific listing of ours does not include the “make an offer” button, we are then currently not accepting anything less than the BIN price for that particular item. The item “Moog MF-104M Moogerfooger Analog Delay Pedal” is in sale since Friday, October 06, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Delay, Echo & Reverb”. The seller is “altomusic” and is located in Middletown, New York. This item can be shipped to United States.
  • Brand: Moog
  • MPN: mf104m

Tags: , , , , ,

Comments are closed.



  • Calendar

  • Categories

  • Recent Search Terms

  • Tag Cloud